Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Polaroid PSMAA10NA
Summary of Contents for Polaroid PSMAA10NA
- Page 1 Polaroid Smart Alarm PSMAA10NA...
-
Page 2: Table Of Contents
Polaroid Smart Alarm Congratulations on buying this alarm system. Installing the alarm system is easy and quick. Before using the product we recommend you read the manual first. There are some parts of the installation which have to be done in the right order to complete the installation successfully. - Page 3 Leaving a message by phone call Phone operation when receiving emergency call Apple and Android App Adding an account Polaroid Smart alarm App overview Setting up the alarm system with the App Request alarm system status by SMS Store emergency telephone numbers...
- Page 4 Polaroid Smart Alarm Restore system to default setting SMS notification of tampering sensors Arm & Disarm by free phone call Conect (new) wireless accesories & RFID tags Connect new wireless sensors Connect new RFID tags Connect and delete wireless sirens...
- Page 5 PSMAA10NA...
-
Page 6: Overview Of The Alarm System
Polaroid Smart Alarm Overview of the Alarm System In the box Front View Rear Side... -
Page 7: Included Accesories
PSMAA10NA Included accesories The Alarm System has the following accessories included in the box: -English manual -English quick guide 1 x Wireless door/window 1 x Pet-Immune PIR contact DWC-102 motion detector PIR-910 2 x RFID tags TAG-26 2 x Multifuncional remote... -
Page 8: Operating Principle Of The Alarm System
Polaroid Smart Alarm Operating principle of the alarm system The alarm system will receive a signal when a sensor has been triggered. The control panel will sound the internal siren and send an SMS to all stored phone numbers. When texting is completed it will then call all stored phone numbers. -
Page 9: Sensors
PSMAA10NA Sensors Sensor placement The alarm system is more effective with well-placed and set sensors. Determine which areas you want to monitor and with which sensor. In the picture below are potencial places shown for different types of sensors from which you can determine what the best placing is for your space. - Page 10 Polaroid Smart Alarm IMPORTANT: Determine before installing the alarm system which group a sensor should be set on. IMPORTANT: If sensor group has to be changed, the sensor must reconnect to the control panel. The figure below shows the four different group settings as can be found inside the sensors.
-
Page 11: Renaming Sensors
PSMAA10NA but this can be changed to between 0-300 seconds. Refer to page 28. When the alarm is set to either ‘Arm or Home’ mode, all sensors in the entry delay group will be monitored. The Single delay group also has a door chime feature that can be turned on or off by texting ‘46701’... -
Page 12: Record Alarm Message
Polaroid Smart Alarm Record alarm message When the alarm is activarted the control panel will call the set emergency numbers and play a meesage. This message can be changed by pressing the button, then type the disarm code (default 1234), press again the button and finally press the button. -
Page 13: Turning On The Control Panel
PSMAA10NA IMPORTANT: In order to use and set up the alarm system, SMS texting will be used. The use of SMS texting costs money. Consult your carrier for the cost. IMPORTANT: The android and/or Apple App both make use of SMS. - Page 14 Polaroid Smart Alarm information on possible SMS commands. The complete menu consists of three parts which can be requested by sending one, two or three question marks as can be seen in the pictures below.
- Page 15 PSMAA10NA Note: Two text messages will be received Note: If you can not receive the reply message from the control panel, please send ‘CSQ’ in a message to the SIM card in the control panel. It will reply an SMS and shows the signal strength, the number value is between 1-31.
-
Page 16: Control Panel Operation
Polaroid Smart Alarm Control Panel Operation Arming the system (‘All groups’) Press . All the sensors will be activated. Partially arming the system (‘Home group’) Press . Sensors which are set to the home group will not be active when home mode of the panel is activated. All other sensors in other groups will remain active. - Page 17 PSMAA10NA button to stop recording. The voice message can be played back by pressing the circle. Naming RFID tags RFID tags can be given a name if someone arms or disarms the alarm system an SMS message with the name will be sent to the pre- shorted RFID text number.
- Page 18 The language of the alarm system will be changed into Dutch. The control panel will send an SMS message to confirm the language is set successfully. Note: The language can also be set in the Polaroid Smart Alarm App.
- Page 19 PSMAA10NA Disarming the alarm system by SMS The main menu, which you receive after texting ‘?’, will display the command for disarming the system (‘0’). If you want to disarm the system you only have to send a ‘0’ to the number of the SIM card in the control panel.
- Page 20 Polaroid Smart Alarm Two-way talk Send a text message with number ‘3’ to the telephone number of the SIM card in the control panel. You will be called back by the system and will be abel to listen and/or speak.
- Page 21 Adding an account The alarm system can be operated with the Polaroid Smart Alarm App. When using the Apple App there will be set up a SMS text message automatically for even function. Press the ‘send’ button to send the text message and set the function you have chosen.
- Page 22 Polaroid Smart Alarm Polaroid Smart alarm App overview The illustration below shows the functions of the home screen of the App. Other tabs will be explained in the following pages. Setting up the Alarm System with the App Setting the alarm system can be done by sending text messages but also by using the App.
- Page 23 PSMAA10NA In the Polaroid Smart Alarm App press the following button: Store emergency telephone numbers Emergency numbers are the telephone numbers which have to be called when the alarm goes off. To get a list of the current settings, send ‘5’ to the control panel.
- Page 24 After sending the message it will send back a message from the control panel to confirm the new settings. With the Polaroid Smart Alarm App this setting can be done as follows: IMPORTANT: Only phone numbers stored in the alarm system can make changes and modify the system.
- Page 25 PSMAA10NA Store SMS number for RFID tags The SMS number for RFID tag is the number which will be used to send a text message to when a RFID tag is used to arm or disarm the system. Copy and edit the received text message and send it bak with the new telephone number.
- Page 26 Polaroid Smart Alarm Copy and edit the received text message and send it back with the new telephone number. After sending the message there will be send back a message from the control panel to confirm the new settings. It is highly recommended to start with your area code or land code.
- Page 27 PSMAA10NA message and adjust the names behind the numbers as shown below. In the App: Change sensor name Each sensor is reffered to as a zone. The first 30 sensors (1-30) can be changed according to personal reference. Each sensor (zone) has 30 free characters to fill in a new name.
- Page 28 Polaroid Smart Alarm To change the name of the zone you can copy the received text message and replace ‘Zone 1 alarm’ for a name of your choice After sending this message you will receive a confirmation of the new settings being adjusted successfully.
- Page 29 PSMAA10NA In the App: Internal siren setting Arm/disarm tone, alarm volume and duration of the internal siren can be adjusted in this menu. Arm/Disarm tone: The default setting is ON, it can be turned off by texting ‘24700’ to the control panel or turned on by texting ‘24701’.
- Page 30 Polaroid Smart Alarm In the App: Change disarm password Left is the response message of the alarm system shown when texting ‘13’ to the control panel. Copy the message and adjust the user code as shown below. In the App:...
- Page 31 PSMAA10NA Setting single zone alarm delay time After setting single zone alarm delay time (Single Delay Group), when the single zone sensor is trigged, the control panel will beep once per second insted of alarming immediately. This allows the user time to disarm the system from the control panel.
- Page 32 Polaroid Smart Alarm Store SMS numbers for status alerts The stored number can receive SMS in case of low battery, power failure or recovery. You can store the numbers by texting ‘16’ to the control panel or by App. Wireless siren arm/disarm tone If you have a wireless siren with your system you can turn on or off the arm/disarm tone by texting ‘63701’= On or ‘63700’= Off.
- Page 33 PSMAA10NA 3. Enter ‘01’; 4. Press [ Restore system to default setting Also called a ‘hard reset’. This should also be performed when changing the SIM card. Long pressing tamper switch for 4 seconds and then quick pressing it 5 times in 3 seconds can also restore the control panel to default setting, and the control panel will beep twice.
- Page 34 Polaroid Smart Alarm FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 35 PSMAA10NA...
- Page 36 Road, Suite 414 San Diego, C.A. 92108 HECHO EN CHINA Polaroid, Polaroid & Pixel, el Polaroid Classic Border logo y Pola- roid Color Spectrum son marcas registradas de PLR IP Holdings, LLC, utilizada bajo licencia. Todas las demás marcas son propie- dad de su respectivo propietario, que no tiene patrocinado, ava- lado ni aprobado este producto.