Polaroid ID-3000 Repair Manual page 205

Polaroid ID3000 Service Manual
8. Remove the two Allen head screws holding the Post Mounting Bracket to the side of the
Printer chassis (see Figure 5-8).
Figure 5-8 Removing Post Mounting Bracket from Printer chassis
Reassembly
1. Perform steps 1 - 8 in reverse order, installing the parts removed from the old Printer
Assembly on the new Printer, reconnecting all cables, black and white power wires to
terminal strip, and power ground to chassis tie point.
NOTE:
NOTE:
When replacing the Post Mounting Bracket (removed in step 8) on the side
of the Printer chassis, gently slide the Bracket toward the front of the Printer
until it stops (do not force it past its natural stopping point). This will help
assure that the Bracket holes for the Thumbscrews will line up with the
holes in the Printer Cover.
If the Cover of the replacement Printer does not have holes for the Post-
mounting Thumbscrews, use the Cover from the old Printer.
5-7
Parts Replacement