Polaroid ID-3000 Repair Manual page 72

Polaroid ID3000 Service Manual
6. Follow these instructions to position the rectangle around the signature area:
7. When the signature rectangle is correctly sized and positioned, press <Enter>. The system
will return to the Adjust System menu.
8. Check the signature position and contrast by making a print. (A print is the only reliable
check on signature quality: monitor display will not show contrast adequately.)
9. If the signature is very light, adjust the contrast thumbwheel on the side of the Signature
Scanner (see "b" in Figure 2-44A).
10. To return to the Issue and Verify menu, press <Esc>.
- to move the entire rectangle, use the regular cursor up/down/left/right
arrow keys.
- to change the height or width of the rectangle, use the arrow keys on
the numeric keypad. Be sure the Num Loc light on the keyboard is
lighted (<Num Loc> ON).
2-50
System Installation