Polaroid ID-3000 Repair Manual page 264

Polaroid ID3000 Service Manual
Appendix 6:SCSI Controller Board Installation in a Universal ID3000
System
Applications
The future domain TMC-885 SCSI Controller Board is for use in Universal ID3000 Systems
which will work with both TX1500 Thermal Printer and CI5000 Plus Film Recorder outputs.
Cables
In systems using the Film Recorder, a 25 to 50-pin MAC SCSI cable is used (P/N 1B0351A).
In systems using the Thermal Printer, termination is external via a 25-pin Apple SCSI termina-
tor connector (P/N 5D003000010).
Jumper settings
Jumper Setting
W1 Closed
W2 Closed
W3 Closed 1-2
Closed 3-4
W4 Closed
W5 Closed
W6 Closed 1-2
Closed 3-4
Closed 5-6
W7 All open
RP1 Open
RP2 Open
Loading Software
On a Universal ID3000 System, first load the core software of the ID3000 film system, then
load the thermal and film system application software, using the Install Software Update menu
choice.
Description
Memory address (DEOOH)
Memory address
Extended memory address
Termination power
Zero wait state
Floppy enable/disable
Interrupts
Termination resistor packs
A-12
Appendix