Polaroid ID-3000 Repair Manual page 100

Polaroid ID3000 Service Manual
MOC_XOFFSET
MOC_YOFFSET
Used to position the card on the preview screen. Can be positive or negative. Use in
combination with CARD_XSIZE and CARD_YSIZE to fit the card image to the preview
screen.
CI-5000 FILM PRINTER CONFIGURATION FILE
File Name: HOC_CI5K.CNF
Objects:
HOC_RESOLUTION
Determines the resolution of the printable area of the film. All of the individual cards
must fit within this area. Practically any values are allowed, but limited by the amount of
memory in the CI5000. Typical values are "1024X768", "1200X800", etc.
CARDS_PER_SHEET
Is "1" for a 1 UP application, "2" for 2 UP.
CARD1_XSIZE
CARD1_YSIZE
Determines the physical size of the first card on the film. The logical coordinates are
mapped to this area. Note that X is always along the long dimension of the film, even for a
2 UP.
CARD1_XOFFSET
CARD1_YOFFSET
Used to position the first card on the film. Used in conjunction with CARD1_XSIZE and
CARD1_YSIZE to fit the card to the die cutter.
CARD2_XSIZE
CARD2_YSIZE
CARD2_XOFFSET
CARD2_YOFFSET
Determines the size and position of the second card on the film. Used only for a 2 UP
application.
PORTNO
It is ignored for a SCSI CI-5000+.
LIGHTEN_DARKEN
Lightens or darkens the entire card. Ranges from "0" to "6", with "3" being the nominal
value, "6" twice as light, "0" half as light.
Troubleshooting/Diagnostics
Type: string numeric
Type: string
Type: string numeric
Type: string numeric
Type: string numeric
Type: string numeric
Type: string numeric
Type: string numeric
3-18