Polaroid ID3000 Service Manual
Portrait Scanner Adjustment
Calibrating the Scanner
Use the following steps to calibrate the scanner whenever fine horizontal lines appear on the scanned
portrait (A).
If these lines reappear within a week of calibration, the scanner maay require service. Contact the
Polaroid Resource Center.
1.
Turn the scanner power switch on.
2.
Insert the white calibration card provided with the system - face-up into the scanner feed
tray.
3.
Using a small screwdriver or a similar tool, momentarily press the calibration button re-
cessed within the back panel of the scanner (A).
4.
Wait for the calibration card to be transported into the scanner and ejected.
5.
Remove the white calibration card from the scanner feed tray.
2-51
System Installation