Polaroid ID-3000 Repair Manual page 132

Error Message
No.
17 Can't Get String Width
18 Error In Font Mapping Pages
19 Can't Open Font File
20 Can't Allocate Enough
Memory For Fonts
21 Error Selecting Font
22 Error Saving Font State
23 Error Restoring Font State
50 Invalid Controller Entry Point
80 Could Not Find
DSP Driver File
81 DSP Driver File Corrupt (Bad
header)
82 DSP Driver File Corrupt (Bad
Header Magic Number)
83 DSP Driver File Corrupt
(Partially Linked)
Probable cause
Missing font file.
Corrupted font file or EMS
error.
Missing font file.
EMS error.
EMS error.
EMS error.
EMS error.
Software not compiled with
this controller.
Wrong path specified for
DRIVER.OUT
Corrupted DSP driver.
Wrong version of DSP driver.
Corrupted DSP driver.
3-50
Corrective action
Verify that fonts are in the Card
Layout file and correct path names
have been specified.
Reinstall the fonts.
Check font paths in Card Layout file
and correct if necessary.
Check for and resolve hardware
memory conflicts or EMS driver
problems. Use MFT.EXE file in the
QEMM directory.
Check for and resolve memory
conflicts or EMS driver problems. Use
MFT.EXE file in the QEMM
directory.
Check the EMS driver; use EMSSTAT
command to check available memory.
Check the EMS driver; use EMSSTAT
command to check available memory.
Check the application script and
correct as needed.
Check DRIVER.OUT path
specification and correct if necessary.
DRIVER.OUT is located in the
ID2PROG directory.
Install a new copy of DRIVER.OUT
from the corresponding core software.
Obtain and install the latest revision of
DRIVER.OUT, from the core
software.
Install a new copy of DRIVER.OUT
from the corresponding core software.