Polaroid ID-3000 Repair Manual page 41

Polaroid ID3000 Service Manual
3. Type in the requested applicant data (see Figure 2-15). When all data is complete and
correct, press <F10> to display the signature message (if required). See Figure 2-16. (If
the system has no Signature Scanner, the Input Portrait Menu — Figure 2-19 — will be
displayed.)
(This is a sample screen — yours may be different)
NOTE: If more than one data screen is used for an applicant (indicated by page 1 of x in the
lower right corner of the screen), use the <Page Down> and <Page Up> keys to
move from one screen to another.
NOTE: If the message List element is required appears, you have entered an unacceptable
value (for example, entering m in a field requiring y or n). To display a list of
acceptable values for the field displayed, press the <F2> key.
Figure 2-15 Applicant data entries
Figure 2-16 Signature prompt screen
2-19
System Installation