Table of Contents
Advertisement
Polaroid ID3000 Service Manual
Troubleshooting Image Quality Problems (Cont'd)
Problem
Portrait too dark or too
light
Portrait to contrasty
Poor portrait color
balance
Probable Cause
Lighten/Darken in Portrait
Only menu not properly
adjusted for lighting con-
ditions
Portrait camera needs
adjustment via software
3-45
Troubleshooting/Diagnostics
Corrective Action
Adjust portrait exposure using the
Lighten or Darken Portrait Only
menu option in the Adjust System.
Adjust Freeze Contrast and Freeze
Offset by selecting Adjust System,
then Portrait Camera. Adjusting the
Contrast will increse or decrease
the contrast; the Offset will com-
pensate for any brightness increase
or decrease.
See Three Steps to Portrait Adjust
ments on page 3-45. You must
capture new portraits to see the
affect of the changes; reissued
portraits will not be affected.
Adjust the proper color balance
using Adjust Tint of Portrait Only
menu option from the Adjust Sys-
tem and ID Printers menus.
If unsure of which way to adjust for
color balance, begin by exposing
six images while changing the
Portrait Tint Red, Green, and Blue
values one at a time, + 1 unit from
nominal. Lay the pictures out, then
adjust in appropriate direction, see
page 3-46.
Advertisement
Chapters
Table of Contents
Troubleshooting
