Polaroid ID-3000 Repair Manual page 163

Error Message
No.
30027 LL Image: Drive Search List
Is Invalid
30028 LL Image: Cannot Create
Destination
Directory
30029 LL Image: Cannot Create
Fullname For An Image
30030 LL Image: No Corel Drive
On Drive List
30100 Can't Find Image In The
Specified Drive List
DB COMPONENT ERROR MESSAGES
6001 DBC3+: Failure to Open File
or Other DBC3+ Error
6002 DBC3+: Invalid Database
Specification or Corrupt
Database
6003 DBC3+: Record Deleted By
Another Station Or Index
Problem
6004 DBC3+: Write Failure - Disk
Space May Be Low
Probable cause
Wrong logical drive was
entered in Drivelis.bb
Wrong logical drive was
entered in Drivelis.bb
Internal code failure
Internal code failure
Image file was deleted
Database or index file failed
to open properly.
Major database problem.
Incorrect database name
specified in .PHY.
Corrupted database file.
Index file problem.
Current disk is full
Disk failure.
3-81
Corrective action
Enter a valid logical drive in the last
line of Drivelis.bb file and reboot the
system .
Enter a valid logical drive in the last
line of Drivelis.bb file and reboot the
system.
Record events leading to the error and
contact the Service Center.
Record events leading to the error and
contact the Service Center.
Go to the database, locate the Pfield in
the specified record and try to locate
the Image file.
Run Reindex Database from the menu.
Examine the error log to determine the
exact nature of the error, then take the
necessary corrective action.
Record events leading to error and
contact the Service Center.
Examine the .PHY file and correct the
database name.
Verify the database contents and
restore the Database file if necessary.
Reindex the database files (use
Reindex Database Files in the file
maintenance menu).
Purge the audit trail databases,
ERROR.LOG files or take other steps
to create more disk space.
Contact the Service Center.