Making An Identification Card - Polaroid ID-3000 Repair Manual

Polaroid ID3000 Service Manual

Making an Identification Card

1. When the Issue and Verify Menu (Figure 2-13) is displayed, select Make a New ID
(highlight that line using the up/down arrow keys, or simply type the first
selection - m or M) and press <Enter>). The applicant data entry screen (Figure 2-14)
will appear.
2. Type an applicant identification number, then press <F10> to search for the applicant's
record.
NOTE: The applicant's data appears if it is available. (A "working" message may appear
while the system is retrieving the data.)
If data cannot be found, the message This will be a new record will appear in the
middle of the screen. Use the space bar to remove this message.
NOTE: This is only a sample data field — yours will have other
criteria.
Figure 2-13 Issue and Verify menu
Figure 2-14 Applicant Data Entry screen
2-18
System Installation
letter of the