Polaroid ID-3000 Repair Manual page 97

Digital security and identification system
Hide thumbs Also See for ID-3000:
Table of Contents

Advertisement

Polaroid ID3000 Service Manual
LIVE_IRIS
The 8 bit value sent to the iris DAC for live mode. Not used for the current support
board. May be used if an iris DAC is someday installed.
FREEZE_IRIS
The 8 bit value sent to the iris DAC for freeze mode. Not used for the current support
board.
STROBE_RECHARGE
The number of seconds required to recharge the strobe. This enforces a minimum time
between strobe firings.
RGB_GAIN
Sets DAC gain at the video input during freeze for RGB cameras. Range "0" to "100".
Note that 0 is highest gain, 100 is lowest gain.
RGB_OFFSET
Sets the brightness during freeze for RGB cameras. Range "0" to "100".
RGB_CONTRAST
Sets the contrast during freeze for RGB cameras. Range "0" to "100", with 100 being
highest contrast.
LIVE_RGB_GAIN
LIVE_RGB_OFFSET
LIVE_RGB_CONTRAST
Same as above, but for live mode.
COMP_GAIN
Sets DAC gain during freeze for NTSC cameras. Range "0" to "100". Note 0 is
highest, 100 is lowest gain.
COMP_OFFSET
Sets the brightness during freeze for NTSC cameras. Range "0" to "100".
COMP_CONTRAST
Sets contrast during freeze for NTSC cameras. Range "0" to "100", with 100 being
highest contrast.
COMP_SATURATION
Sets color saturation during freeze for NTSC cameras. Range "0" to "100". 0 is no
color.
COMP_HUE
Sets hue during freeze for NTSC cameras. Range "0" to "100".
Type: string numeric
Type: string numeric
Type: string numeric
Type: string numeric
Type: string numeric
Type: string numeric
Type: string numeric
Type: string numeric
Type: string numeric
Type: string numeric
Type: string numeric
3-15
Troubleshooting/Diagnostics

Advertisement

Table of Contents
loading

Table of Contents