Polaroid ID-3000 Repair Manual page 30

Polaroid ID3000 Service Manual
Checking computer internal connections
Computer circuit boards and cables can loosen during shipping and cause malfunctions. Check them
as follows before proceeding further with installation:
1. Remove the computer cover (Figure 2-6).
2. Visually inspect all computer components to assure they are fully seated in their slots,
sockets and board guides, and that all cable connections are secure, especially the alpha
cable that connects between the matrox board and the VGA board.
3. Inspect the battery wire and its connection to the board, and tighten if necessary.
4. Replace the computer cover.
.
Figure 2-6 Removing the Computer Cover
2-8
System Installation