Polaroid ID-3000 Repair Manual page 159

Error Message
No.
4019 Range Update Cannot Change
The VSAM Primary Key
4020 Field Data Format Does Not
Match the Data Dictionary.
4021 Date or Time Format Does
Not Match the Data
Dictionary
4998 Command Sequence Error
4999 Protocol Error Unknown Data
5001 An Invalid Function Is
Specified
5002 A Protocol Violation Error
Has Occurred
Communications With The
5003 Host Have Been Lost
5006 The HLLAPI_C Module Is
Not Resident
5007 Unable To Open The "PHY"
File For The Current View
5009 The 3274 Controller Is Not
Powered On
5011 A Temporary
Communications Failure Has
Occurred
Probable cause
Update range attempting to
change the primary key field.
Inconsistent host and ID-3000
workstation data dictionaries.
Inconsistent host and ID-3000
workstation data dictionaries.
Read lock did not precede an
update command.
Transmission error.
Unknown function requested.
Transmission error.
Transmission error.
DCA code not resident.
View file not found.
3274 controller off.
Transmission error.
3-77
Corrective action
Correct the application to prevent
unique fields from being updated.
Ensure the dictionaries are the same.
Ensure the dictionaries are the same.
Correct the application to provide a
Read Lock.
Reestablish communications and retry
the operation. If the error persists, run
with Log Level 5 and send the log file
to Service Center.
Correct the application.
Reestablish communications and retry
the operation. If the error persists, run
with Log Level 5 and send the log file
to Service Center.
Reestablish communications and retry
the operation. If the error persists, run
with Log Level 5 and send the log file
to Service Center.
Load the DCA code before the ID-
3000 applications.
Verify that a view (.VUE) file is
present.
Turn on the 3274 controller.
Reestablish communications and retry
the operation. If the error persists, run
with log level 5 and send the log file
to Service Center.