Surge Protector/Power Strip - Polaroid ID-3000 Repair Manual

Polaroid ID3000 Service Manual Description
voltage level switch for compatibility with line voltages world-wide.
One Laminator model is for use with photographic prints produced by the CI-5000 CFR,
another Laminator model is for use with prints produced by the Color Thermal Printer
TX1500. (Units are not interchangeable in application.)
Figure 1-13 ID-3000 System ID card Laminators

Surge Protector/Power Strip

The six-receptacle power outlet strip shown in Figure 1-14 includes a filter/surge protector
circuit to protect ID-3000 System components against AC line surges and spikes. An illumi-
nated rocker switch allows turning AC power on or off to all units plugged into the strip.
Figure 1-14 Surge Protector/AC Power Outlet Strip
1-18