Polaroid ID3000 Service Manual
Replacing the Color Scanner
1.
Unplug the power and SCSI cables from the back of the defective color scanner.
2.
Unpack the new CS-500i Color Scanner. Save all the packaging.
.3.
The CS500i scanner should be set up as SCSI device ID4. The SCSI ID switch is
located .on the back of the scanner, near the SCSI connectors. If the switch is not set
at 4, set it at 4 now.
4.
Connect both the SCSI cable and the power cable.
5.
Turn ON the scanner.
Figure 5-13 Scanner operator controls
5-12
Parts Replacement