Restoring The Factory-Set Capture Area - Polaroid ID-3000 Repair Manual

Polaroid ID3000 Service Manual
If the size or placement of the displayed portrait requires more adjustment, press the space
bar to return to the scanner adjustment menu. Then go back to step 4.
12. Select Save and Exit to save the new settings and return to the system adjustment menu.
13. Press the Esc key to return to the main menu.

Restoring the Factory-Set Capture Area

If you have adjusted the area captured by the scanner as described on page 115, you can restore the
captured area to the original settings as follows:
1. Select Adjust System from the operator's menu to open the adjust system menu.
2. Select Color Portrait Scanner to display the scanner adjustment menu.
2-55
System Installation