Replacing The Computer Hard Disk - Polaroid ID-3000 Repair Manual

Polaroid ID3000 Service Manual
Replacing the Computer Hard Disk Drive
1. If the hard disk drive being replaced is inoperable, omit this step and go directly to step 2.
If the drive is operable, however, be sure to first back up the APPS directory, database
directory and AWS directory.
NOTE: If the customer has a tape drive, make a backup of the entire hard disk.
2. To remove the defective hard disk drive:
a. Turn the computer power OFF and unplug the power cord.
b. Remove the computer cover (Figure 5-31).
c. Depress the latches on each side of the floppy drive (Figure 5-32), slide the floppy
drive half way out of the top shelf, unplug the connectors, then remove the floppy
drive.
NOTE: BEFORE removing cables, make a written note of connector orientation!
Figure 5-31 Removing Computer Cover
Figure 5-32 Removing Floppy Disk Drive
5-27
Parts Replacement