Polaroid ID3000 Service Manual
Adjusting the Card for the ID3000 Film System
These procedures should be performed at installation of any ID- 3000F System, to insure that all ID
card parameters are at normal settings.
1.
Bring up the issue and verify menu, select Adjust System and press <Enter> to
open Color Printer/Portrait Camera window (Figure 2-28).
2.
From the window just opened, select ID Printer and press <Enter> to display the
Color Tint Menu (Figure 2-29).
Figure 2-28 Printer/Camera Adjustment window
Figure 2-29 Color Printer Adjustment window
2-34
System Installation