System Functions; Make A New Id Card - Polaroid ID-3000 Repair Manual

Polaroid ID3000 Service Manual Description
ID-3000 System Functions
Simple operation is provided by monitor display of menu choices and prompts, to which the
operator responds by typing appropriate answers with the keyboard. Automated diagnostics
help speed identification and correction of operator errors or system malfunctions.
After log-in by typing a username and password and selecting Issue or Verify Badges from the
Main Menu, the system asks the operator to set the film counter by entering the film tab
number.
When these two operations have been done correctly, the system then displays the Operator's
Menu (Figure 1-3). The six choices offered by this menu are explained below. Menu and
screen selections are easily made by either highlighting the choice or typing the first letter of
the choice; help screens for most menus and screens further simplify and speed system use.
(See the ID-3000 System Operator's Guide for detailed explanations of all operating steps.)
Figure 1-3 Operator's Menu
Make a New ID
Guides the operator in issuing an ID card to an applicant who has not had a card made with
this system, or updating an applicant's portrait, signature and data before issuing a replace-
ment card. Steps involve capturing and storing the new portrait, signature and applicant data,
and producing an ID card. Film develops in 90 seconds (or thermal image is printed), and is
then die cut and laminated. Applicant's portrait, signature and text data previously stored
remain in the system or host disk.
1-7