Polaroid ID-3000 Repair Manual page 204

Polaroid ID3000 Service Manual
6. Remove the four screws "F" holding the inner Chassis Adapter to the rear of the Printer
(see Figure 5-6); set the Adapter aside.
Figure 5-6 Removing the Chassis Adapter from rear of Printer
7. Remove the Printer Cover by removing five screws "G" (two from each side, one from the
rear — see Figure 5-7). Lift the rear of the Cover slightly while pushing the sides
outward, then slide the Cover back and off.
Figure 5-7 Removing Cover from Thermal Printer
5-6
Parts Replacement