Table of Contents
Advertisement
OPERATING INSTRUCTIONS
Restoring the Factory-Set Capture Area
If you have adjusted the area captured by the scanner
as described on page 128, you can restore the captured
area to the original settings as follows:
1. Select Adjust System from the operator's menu to
open the adjust system menu.
Make a New ID Card
Capture Images Only
Enter Applicant Data Only
Verify Applicant
Reissue ID Card
Adjust System
ID Printer
Portrait Camera
Signature Scanner
Color Portrait Scanner
2. Select Color Portrait Scanner to display the
scanner adjustment menu.
Make a New ID Card
Capture Images Only
Enter Applicant Data Only
Verify Applicant
Reissue ID Card
Adjust System
ID Printer
Portrait Camera
Signature Scanner
Color Portrait Scanner
PAGE 132
PORTRAIT SCANNER ADJUSTMENT
ID-3000 WORKSTATION VER 2.4
Adjust scanned area
Select film type
ADJMEN.EPS
SCANADJ.EPS
Advertisement
Table of Contents
