System Overview; Product Overview - Zte ZXR10 5900 Series Hardware Manual

2
C h a p t e r

System Overview

Table of Contents

Product Overview ............................................................... 3

Functions .......................................................................... 4
Technical Features and Parameters ....................................... 5
Product Overview
ZXR10 5900/5200 series products are gigabit Ethernet routing
switches developed by ZTE independently. The switches can be
both used in convergence layer of MAN and used as L3 switch at
large-size enterprise network, campus network, and used as ac-
cess switch for desktop access from gigabit Ethernet network, as
well as used in data center which requires gigabit bandwidth (e.g.
VOD server, multicast server, file server etc.).
ZXR10 5900/5200 series products provide Gigabit Ethernet inter-
faces and 10G Ethernet interfaces. All support L2/L3 line-rate
forwarding on ports and meet requirements to increasing band-
width.ZXR10 5900/5200 series products also support multiple uni-
cast and multicast routing protocols.
With the development of network, there are more and more ser-
vice types in data network, which require better service quality
and security to network devices.ZXR10 5900/5200 series prod-
ucts provide abundant policies and resources for QoS and
guarantee service quality and system security.
One of ZXR10 5900/5200 series products, ZXR10 5928-PS Eth-
ernet switch supports PoE. All of the 24 gigabit ports on this
switch support PoE power supply, PoE in CISCO standard and IEEE
802.3af standard. The maximum one-port output is 30w. At the
same time, 24 30w ports can be supported. This POE switch can
be used to connect device on Ethernet receiving end, including
CISCO IP telephone, access point and camera. All down-stream
Ethernet receiving end switch can be powered through PoE output
port. By using PoE switch, you do not need to install wall outlet
or purchase a great amount of cables and circuits in IP telephone
and WLAN deployment.
crossover cables are not required for running IP devices.
ZXR10 5900/5200 series products have the following features:
�
Carrier-class reliability
� Full-speed forwarding and filtering capability
Confidential and Proprietary Information of ZTE CORPORATION
Additionally, power connector or PoE
ACL and
3