Cluster-Cli - Motorola RFS7000 Series Reference Manual

3.1.2 cluster-cli

User Exec Commands
Use this command to cluster all the CLI pertaining to the context it appears. This feature is useful to configure
each switch in the cluster by logging in to one switch. This eliminates administrator time and effort N-1 times
(if there are N switches in the cluster).
A new context called redundancy
are executed to all members of the cluster.
Syntax
cluster-cli enable
Parameters
enable
Example
RFS7000(config)#show redundancy-members
Member ID
Member State
Member First Seen
Member Last Seen
Number of HB sent
Number of HB received
Number of Update sent
Number of Update received
Member Standby Mode
Member AP adoption count
Member Installed License Count: 0
Member Radio portal Count
Member Associated MU Count
Member Rogue AP detected Count: 0
Member Self Healing AP Count
Member Switch Adopt Capacity
Member Running Image Version
RFS7000(config)#
RFS7000:cluster-cli#show version
*** START: Response from member: 172.20.15.18 ****
RFS7000 version 1.0.0.0-261X
Copyright © 2006 Symbol Technologies, Inc.
Booted from primary.
Switch uptime is 7 days, 4 hours 28 minutes
*** END: Response from member: 172.20.15.18 ****
RFS7000 version 1.0.0.0-262X
Copyright © 2006 Symbol Technologies, Inc.
Booted from primary.
Switch uptime is 7 days, 4 hours 28 minutes
RFS7000:cluster-cli#
is created to support cluster-cli. Any commands executed under this context
Enables cluster context.
: 192.168.100.1
: Peer Seen
: Mar 15 16:24:54 2008
: Mar 15 16:25:00 2008
: 38044
: 3
: 0
: 0
: Primary
: 0
: 0
: 0
: 0
: 0
:
3-5