Auto Jog On Move - Merging Pyramix 4.3 User Manual

User Manual : General Settings
Jog Settings
Speed ceiling
Sets the maximum jog speed from a choice of 1X, 2X, 4X or 8X play speed
Sensitivity
Sets the time moved in one revolution of the jog wheel. Type the required value in the box.
Smoothing Filter
The Smoothing Filter parameter determines the length of the "fade in" and "fade out" when beginning
and ending scrubbing. Enter the required value in the box expressed in video frames.
Flywheel inertia
Low follows the actual movements as sent by the jog wheel. High passes the actual movement through
a smoothing filter. So, when the slider is set to Low the Smoothing Filter parameters have no effect.
For sound to picture work where tight sync to picture is required use a setting biased to Low. For a more
pronounced flywheel effect choose a Higher setting.
The Middle position is a good starting point.
Transient response accelerator
Optimizes Pyramix's reactivity to jog moves, settings range from Smooth to Accurate.
When the slider approaches Accurate there may be some strange undesirable effects.

Auto Jog on move

This setting is only relevant when a hardware controller is available. Otherwise, the middle mouse but-
ton activates jog mode. Where a hardware controller is available and if Auto Jog on move is not
checked, pressing the Jog Chase button will manually activate jog mode.
96
User Manual