Display and Editing of Automation Data
The automation data recorded for any control can be viewed and edited on any track in the Timeline.
Clicking the
data as a black line when being replayed and a red line when being written. Right-clicking the Show/
Hide Automation button pops up the automation menu for the track.
Virtual Tracks
To view more than one automation parameter for a track, create Virtual tracks for each parameter you
wish to view. Please see Virtual Tracks on page 122
Connected Strip
Enables automation data for any control on the mixer strip to be selected for display via sub-menus. In
this illustration the gain of band 2 Eq of the strip-tools plug-in will be displayed.
Mixer
Functions in the same manner as Connected Strip but enables display of automation data for ANY
control on the current mixer. Auto Display should normally be left unchecked when using this option.
(see below)
Auto Display
When Auto Display is checked the automation data displayed will be from the last control connected to
the track which has changed state.
Note that, if Auto Display is used when a control has been selected for display using Mixer then if a
control on the strip connected to the track is moved display of the control selected using Mixer will be
lost. The automation data is retained. For this reason Auto Display should normally be off when any
control not on the connected strip is displayed.
Show/Hide Automation button in the Track Header displays or hides automation
User Manual : Automation
Track Automation context menu and sub-menus
196
User Manual
Need help?
Do you have a question about the Pyramix 4.3 and is the answer not in the manual?