Merging Pyramix 4.3 User Manual page 166

All these parameters are stored in the project. If you want to define the value as Default value, right click
on the value and select "Set as Default".
• Country Code: 2 characters (exp. GB, SW, FR etc...)
• Producer: 3 characters (exp. W01).
• Year of Reference: 2 digits (exp. 02).
• Designation Code: 5 digits (exp. 00012, 80010).
• Increment by: used to auto increment the designation code part of the ISRC. The default
value is "1".
All Markers:
to show and edit all the PQ markers. Here only the PQ is modified, not the audio edit.
CD Markers can be Cut / Copied / Pasted like standard Markers by right clicking an entry.
Name
Name of the PQ Marker. When the markers are automatically created with the function "CD Mark
Group", the stop marker gets the same name as the start marker + "Stop" at the end. The "*" tells you
that this marker was auto generated.
# (Number)
(Read only) Number of the PQ Marker. The stop marker has the same number as the start. The index
markers begin at 2 then Inc... This is a Read only property; it depends on the position of the marker in
relation to the others.
Type
Type of the Marker.
TimeCode
TimeCode position of the Marker.
Offset
Offset of the Marker.
Use Offset
Enable or disable the Offset of a marker.
Table of Content:
to view, in real time, the final Table of Content, including the offsets.
Right section
The right-hand pane is the CD Tracks List which enables viewing and editing the content of the CD; by
track. All modifications applied here automatically affect your edit. For example, if you modify a
track pause from 4 to 6 second, all the clips (from the first one in the selected track to the last clip of the
last track), markers and automation will be rippled to the right to add 2 second to the pause.
All operations can be undone. To access further functions, right click on the grid to display a popup
menu.
User Manual : Project Management Panel Tabs
166
User Manual