External Digital Mixers - Merging Pyramix 4.3 User Manual

J.L. Cooper MCS 3000 (& MCS Bridge)
Raditek SAC-2k
Mackie Control
Mackie HUI

External digital mixers

Sony DMX-R100
Yamaha DM-2000 (via HUI emulation)
Yamaha DM-1000 (via HUI emulation)
Yamaha 02R-96 (via HUI emulation)
9-pin Control of Pyramix by an External Machine
If you wish to control Pyramix as a slave from an external 9-pin controller / synchronizer then the exter-
nal controller must be set up as a Controller in Pyramix. If you wish Pyramix to work as a 9-pin control-
ler, e.g. to control an audio or video tape recorder then the target machine must be set up as an
External Machine. Please see: External Machines on page 174
Note: The 9-pin driver in Virtual Transport is only intended for use with VT clients
requiring 9-pin control. At present this means only the VT Video Player when used
STAND ALONE. I.e. without running Pyramix on the same machine.
User Manual : Remote Control
User Manual
323