Time-Code Sync; Cue Sequencer; Dsd Project - Merging Pyramix 4.3 User Manual

When an existing DXD Mixing Project is opened this dialog appears:
Would you like to convert this DXD Mixing Project into a DSD only Project?
If the answer is YES the project will be opened in DSD mode and the DXD mixer will be replaced by a
default mono mix 8x8.
If the answer is NO the project will be opened in DXD Mixing mode with the DXD Mixer in the same
configuration as it was when the Project was Saved.

DSD Project

The DSD Project - can be used recording, editing and mastering DSD/SACD in DSD format (2.8 MHz -
1 bit)Project for recording, editing and mastering DSD/SACD in DSD format (2.8 MHz - 1 bit)
Opening a DSD Project
When an exisiting DSD Project is opened this dialog appears:
Would you like to convert this DSD Project into a DXD Mixing Project ?
If the answer is YES the project will be opened in DXD Mixing mode. (Though all your media files will
remain in DSD IFF format)
If the answer is NO the project will be opened in DSD mode as it was when created.

Time-code Sync

Required if you intend to use LTC (Linear TimeCode) or VITC (Vertical Interval TimeCode) to synchro-
nize Pyramix to external equipment.

Cue Sequencer

The Cue Sequencer is a live playout system
A Cue is defined as a Track Group and all the Tracks and clips it contains. All Track Groups in the
composition appear in the Cue Sequencer list and are called a Cue.
Cues can be re-ordered in the Cue Sequencer list view by drag and dropping lines or groups of lines.
Double-clicking on a Cue selects its first track in the Editor.
Cue Parameters
Cues have the following parameters:
Name:
Notes:
User Manual : Appendix III Optional Features
Convert DSD Project to DXD Mixing Project mode? Dialog
Same as the Track Group name
free notes typed by the user
342
User Manual