Cd Text Fields - Merging Pyramix 4.3 User Manual

User Manual : Project Management Panel Tabs
The fields are:
Name
Name of the CD Track
Number
Number of the Track. Click on the Value to display a drop-down list with all available track position num-
bers, then you can select a new location for the track (E.g. Send track 9 to 2).
Pause
Pause of the CD Track: Time between the start of the track and the stop of the previous one. The pause
of the first track is always 0 (the 2 second pause required by the RED Book standard are automatically
added for you in the final TOC) except in case of a Ghost track (see the Ghost Track section for more
detail).
Start
Start of the CD Track in the Timeline. Modify this value to ripple the track and all the tracks after.
End
Stop of the CD Track in the Timeline. Modify this value to ripple all the tracks after (performs a similar
function to Length).
Length
Length of the CD Track. Modify this value to increase or decrease the length of the track and ripple all
the tracks after.
Start Offset
Negative Offset for the start marker of the track.
Use Offset
Enable or disable the offsets of the track (start, stop, and index). To individually apply offset to start, stop
and index, go the All Markers page in the left-hand panel.
ISRC
International Standard Recording Code. See the CD Properties section in the left-hand panel to get a
complete description of this code. See the Extra Functions section to see how to automatically create
this code. This field has a validation routine. The code may be entered as you wish and will automati-
cally be validated. (E.g. "(FR) W01 - 02 / 1" gives "FRW010200001").
Copy
Toggles the Copy Protection bit.
Comment
General purpose comment. For 'in house notes'.

CD Text fields

All the remaining fields can be copied from the CD Properties page, see the Extra functions section,
after this:
CD Text Title
CD Text Performer
167
User Manual