Cmx Autoconform; Cmx Reconform - Merging Pyramix 4.3 User Manual

* FIXREEL: DAT12 d:\pmxmedia\ambiance43b.wav FILENAME OFFSET 08:45:32:00
This covers most cases of media reconnection and should help solve special cases of EDLs exported
by exotic systems.
Media reconnection failure
An imported clip whose media has not been retrieved or whose media is not at the same sampling rate
as the current project will be associated a 'fake' media.
It WILL NOT be possible to retrieve its media file after the import, but it will be possible to associate a
new media file in the standard way (Control key pressed while dragging a media file from a media
folder).

CMX Autoconform

When an CMX EDL is not accompanied by audio files on disk an Autoconform can be performed. A
Digitizing Session is used to grab the audio referenced by the CMX EDL from an external machine
(This may be operated under 9-pin control or simple time-code chase). The CMX EDL can then be
imported into an Editing Project (as described above) to link to the digitized media.

CMX Reconform

The Reconform function allows recuts to be applied to a project by loading a so called "Change EDL" .
This EDL is a standard CMX EDL generated from a "State 1 EDL" and a "State 2 EDL". The Reconform
function rearranges Cues within the current project where necessary to reflect the change from State 1
to State 2 by creating edits on all tracks of the project using the original material as sources and placing
them to the new destination TimeCodes.
Menu: Project > Reconform
User Manual : Conforming and Reconforming
Project Menu - Reconform Sub-menu
184
User Manual