Discontinuous TimeCode
Auto-Punch mode allows a whole tape with discontinuous TimeCode to automatically be recorded.
•
Set all desired tracks is auto-punch mode
•
Place Mark In at 00:00:00:00 and Mark Out at 23:59:59:24 (default values for a new project)
•
Plug LTC Out from the tape machine into Pyramix
•
Set Chase mode to HARD CHASE
•
Rewind the tape
•
Press Play on the tape machine
Each time a valid TC is encountered Pyramix will lock and start recording a new clip, then stop when the
timecode jumps. A separate media file will be created for each continuous timecode on the tape.
User Manual : Application Specific Configurations
280
User Manual
Need help?
Do you have a question about the Pyramix 4.3 and is the answer not in the manual?