Merging Pyramix 4.3 User Manual page 253

2. In the Target section, click in the drop-down menu to select a CD-R device. DiscWrite should rec-
ognize a previously configured CD-R device which is also recognized by the OS itself.
3. Also in the Target section, click on the Settings... button to open the CD-R Settings dialog box.
Set these as desired for the CD-R burning session.
4. When all CD-R settings are adjusted as needed, click the Record button in the Target section to
actually burn the CD-R.
DDP Masters
Note: As in the above example, Pyramix allows you to specify burning your DDP to a
folder (instead of an Exabyte tape) and from there on it may be transfered, copied,
duplicated, checked, archived or whatever else you want to do with it, such as sending
it over a secure FTP connection.
Red Book Compatible Masters
If the CD-R is to be used as a "Red Book" compatible master "Contiguous" MUST be selected.
CD Copy
Where suitable hardware is available, a CD may be directly copied by selecting a CD-ROM drive as the
source and a CD-R/RW drive as the destination.
TOCs
Print TOC... prints the current TOC in the currently selected report format.
Save TOC... opens a file save dialog to save the current TOC as a text (.txt) file.
Select Report... opens a file open dialog. Any previously designed TOC report format (*.lst) may be
loaded.
Design Report... Opens the Report Designer. Please see the on-line documentation.
User Manual : DiscWrite
DiscWrite General and Advanced Settings
User Manual
253