Merging Pyramix 4.3 User Manual page 289

Auto Select Destination after Edit
Limit 1 Gate Sources to End/Beginning of Clip
3 Gates Auto-Edit does Overwrite
3 Gates Auto-Edit does Insert
Jog-Wheel Editing
Move & Place
Duplicate & Place
Editing Modes > Insert Mode >
When this option is checked (enabled), the Destination Gate In point is
automatically set to the current Gate Out point after any Source-Destina-
tion operation
When this option is checked (enabled), the Destination Track Group is
automatically selected after any Source-Destination operation
When this option is checked (enabled), then the Source material
between the Source Gate and the end of the clip under the Gate instead
of the whole track is copied to the Destination
When this option is checked (enabled), then when 2 Gates are set in a
Source and 1 is set in the Destination then AutoEdit performs an Over-
write operation
When this option is checked (enabled), then when 2 Gates are set in a
Source and 1 is set in the Destination then AutoEdit performs an Insert
operation
A number of editing actions may be undertaken on a selected clip or
group of clips using a jog-wheel on an external hardware controller.
First select the Clip or group of Clips, then select the desired Jog-Wheel
Editing Mode from the choice of:
Move
Trim In
Trim Out
Trim Fade Out
Tim Fade In
Trim Fade In Symmetrically
Trim Fade Out Symmetrically
Trim Sync Point
Slip In
Slip Out
Slide Media
Now simply move the jog wheel to Move, Trim, Slip or Slide the Clip(s)
Pressing the Spacebar or Enter confirms the change(s), Esc cancels.
Opens the Placement Tool to allow the currently selected clip or region to be
directly placed (moved) to a location in the Timeline.
Please see also: The Placement Tool on page 65
Opens the Placement Tool to allow the a copy of the currently selected clip or
region to be directly placed (moved) to a location in the Timeline.
Please see also: The Placement Tool on page 65
User Manual : Menus - Edit menu
User Manual
289