Status Menu; Display Status Menu; Status Messages Screen; Display Status Messages Screen - Cisco 7941G Administration Manual

Model Information, Status, and Statistics

Status Menu

The Status menu includes theses options, which provide information about the phone and its operation:
• Status Messages: Displays the Status Messages screen, which shows a log of important system messages.
• Network Statistics: Displays the Network Statistics screen, which shows Ethernet traffic statistics.
• Firmware Versions: Displays the Firmware Versions screen, which shows information about the firmware
• Expansion Modules: Displays the Expansion Modules screen, which shows information about the

Display Status Menu

Procedure
Step 1
Press Apps.
Step 2 Select Admin Settings > Status Menu.

Status Messages Screen

The Status Messages screen displays the 10 most recent status messages that the phone has generated. You
can access this screen at any time, even if the phone has not finished starting up.
172
errors.

Display Status Messages Screen

To display the Status Messages screen, follow these steps:
Procedure
Step 1 Press Settings.
Step 2 Select Status.
Step 3 Select Status Messages.
Step 4
To remove current status messages, press Clear.
Step 5 To exit the Status Messages screen, press Exit.
running on the phone.
Cisco Unified IP Phone Expansion Module, if connected to the phone.
describes the status messages that might appear. This table also includes actions you can take to address
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Status Messages, on page
Communications Manager 9.0 (SCCP and SIP)
Status Menu
171