Cisco 7941G Administration Manual page 127

Cisco Unified IP Phone Settings
Option
IPv6 Load Server
IPv6 Log Server
Related Topics
Display Settings Menu, on page 60
Network Configuration Menu, on page 64
Description
Used to optimize installation time for
phone firmware upgrades and off load the
WAN by storing images locally, negating
the need to traverse the WAN link for each
phone's upgrade.
You can set the Load Server to another
TFTP server IP address or name other than
the IPv6 TFTP Server 1 or IPv6 TFTP
Server 2 from which the phone firmware
can be retrieved for phone upgrades. When
the Load Server option is set, the phone
contacts the designated server for the
firmware upgrade.
Note
Note
Indicates the IP address and port of the
remote logging machine to which the
phone sends log messages. These log
messages help in debugging the peer to
peer image distribution feature.
Note
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
The Load Server option allows
you to specify an alternate TFTP
server for phone upgrades only.
The phone continues to use IPv6
TFTP Server 1 or IPv6 TFTP
Server 2 to obtain configuration
files. The Load Server option does
not provide management of the
process and of the files, such as
file transfer, compression, or
deletion.
When you configure both an IPv6
Load Server and a Load Server
(for IPv4), the IPv6 Load server
takes precedence.
The remote logging setting does
not affect the sharing log
messages sent to the phone log.
Communications Manager 9.0 (SCCP and SIP)
Network Configuration Menu
To Change
Use
Cisco Unified Communications
Manager Administration to modify.
Use
Cisco Unified Communications
Manager Administration to modify.
107