Sip Configuration Menu For Sip Phones - Cisco 7941G Administration Manual

Cisco Unified IP Phone Settings
State
Standby
Blank
An option may also display one of more of the designations or icons shown in the following table.
Table 14: Cisco Unified Communications Manager Server Designations
Designation
SRST
TFTP
(Authentication icon)
(Encryption icon)

SIP Configuration Menu for SIP Phones

The SIP Configuration menu contains these sub-menus:
Description
Cisco Unified Communications Manager server to which the phone switches
if the current server becomes unavailable
No current connection to this Cisco Unified Communications Manager
server
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Description
Indicates a Survivable Remote Site Telephony router that can provide
Cisco Unified Communications Manager functionality with a limited
feature set. This router assumes control of call processing if all other
Cisco Unified Communications Manager servers become unreachable.
The SRST Cisco Unified Communications Manager always appears last
in the list of servers, even if it is active.
For more information, see the "Survivable Remote Site Telephony
Configuration" chapter in the Cisco Unified Communications Manager
Administration Guide.
Indicates that the phone was unable to register with a Cisco Unified
Communications Manager listed in its configuration file, and it registered
with the TFTP server instead.
Appears as a shield and indicates that the call is from a trusted device,
and that the connection to Cisco Unified Communications Manager is
authenticated. For more information about authentication, see the Cisco
Unified Communications Manager Security Guide.
Appears as a padlock and indicates that the call is from a trusted device,
and that the connection to Cisco Unified Communications Manager is
authenticated and encrypted. For more information about authentication
and encryption, see the Cisco Unified Communications Manager Security
Guide.
The Encryption icon is also displayed when a Cisco Unified IP Phone
is configured as protected. For more information about protected calls,
see the Cisco Unified Communications Manager Security Guide.
Protected calls are not authenticated.
Communications Manager 9.0 (SCCP and SIP)
SIP Configuration Menu for SIP Phones
85