Cisco 7941G Administration Manual page 215

Remote Monitoring
Item
Boot Load ID
Version
Expansion Module 1
Expansion Module 2
Hardware Revision
Serial Number
Model Number
Message Waiting
UDI
Time
Time Zone
Date
Description
Identifier of the factory-installed load running on the phone
Version of the firmware running on the phone
Phone load ID for the first Cisco Unified IP Phone Expansion Module, if
connected to the phone
Phone load ID for the second Cisco Unified IP Phone Expansion Module, if
connected to the phone
Revision value of the phone hardware
Serial number of the phone
Model number of the phone
Indicates if there is a voice message waiting on any line for this phone
Displays the following Cisco Unique Device Identifier (UDI) information about
the phone:
• Device Type: Indicates hardware type. For example, phone displays for
all phone models
• Device Description: Displays the name of the phone associated with the
indicated model type
• Product Identifier: Specifies the phone model
• Version Identifier: Represents the hardware version of the phone
The Version Identifier field might display a blank screen if the user is
using an older model Cisco Unified IP Phone, because the hardware does
not provide this information.
• Serial Number: Displays the unique serial number of the phone
Time obtained from the Date/Time Group in Cisco Unified Communications
Manager to which the phone belongs
Time zone obtained from the Date/Time Group in Cisco Unified Communications
Manager to which the phone belongs
Date obtained from the Date/Time Group in Cisco Unified Communications
Manager to which the phone belongs
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Device Information Area
Communications Manager 9.0 (SCCP and SIP)
195