Cisco 7941G Administration Manual page 279

Basic Phone Administration Steps
Note
• Location: Choose the appropriate location for this Cisco Unified IP Phone.
• Owner User ID: From the drop-down menu, choose the user ID of the assigned phone user.
b) In the Protocol Specific Information pane of this window, choose a Device Security Profile from the
drop-down list. To enable security features for a phone, you must configure a new security profile for the
device type and protocol and apply it to the phone. If the phone does not support security, choose a
nonsecure profile.
To identify the settings that are contained in the profile, choose System > Security Profile > Phone
Security Profile.
Note
c) Also in the Protocol Specific Information pane of this window, choose the applicable SIP Profile from the
drop-down list for SIP phones.
d) In the Extension Information pane of this window, check the Enable Extension Mobility box if this phone
supports Cisco Extension Mobility.
e) In the Product Specific Configuration Layout pane of this window, enable the Video Capabilities field if
this field appears on your window.
f) Click Save.
Step 2 Configure line settings:
a) On the Phone Configuration window, click Line 1 on the left pane of the window. The Directory Number
Configuration window appears.
b) In the Directory Number field, enter a valid number that can be dialed.
Note
Example: 26640 is the directory number of user John Doe in the example above.
c) From the Route Partition drop-down list, choose the partition to which the directory number belongs. If
you do not want to restrict access to the directory number, choose <None> for the partition.
d) From the Calling Search Space drop-down list (Directory Number Settings pane of the Directory Number
Configuration window), choose the appropriate calling search space. A calling search space comprises a
collection of partitions that are searched for numbers that are called from this directory number. The value
that you choose applies to all devices that are using this directory number.
e) In the Call Pickup and Call Forward Settings pane of the Directory Number Configuration window, choose
the items (for example, Forward All, Forward Busy Internal) and corresponding destinations to which
calls should be sent.
Example: If you want incoming internal and external calls that receive a busy signal to be forwarded to
the voice mail for this line, check the Voice Mail box next to the "Forward Busy Internal" and "Forward
Busy External" items in the left column of the Call Pickup and Call Forward Settings pane.
f) In the "Line 1 on Device..." pane of the Directory Number Configuration window, configure the following
fields:
• Display (Internal Caller ID field): You can enter the first name and last name of the user of this
Calling Search Spaces are defined on the Calling Search Space Configuration window of Cisco
Unified Communications Manager Administration (Calling routing > Class of Control > Calling
Search Space). You can use the search fields in conjunction with the Find button to find all
configured Calling Search Spaces and their current settings.
The security profile chosen should be based on the overall security strategy of the company.
This field should contain the same number that appears in the Telephone Number field on the
User Configuration window.
device so that this name is displayed for all internal calls. You can also leave this field blank to have
the system display the phone extension.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Set Up Phone Fields
Communications Manager 9.0 (SCCP and SIP)
259