Chapter 7
Status Menu
Status Menu
Status Messages Screen
Cisco IP Phone Administration Guide for Cisco CallManager, Cisco IP Phone 7961G/7961G-GE and 7941G/7941G-GE
7-6
Viewing Security Information, Model Information, Status, and Statistics on the Cisco IP Phone
The Status menu contains the following options, which provide information about
the phone and its operation:
Status Messages—Displays the Status Messages screen, which shows a log
•
of important system messages. For more information, see the
Messages Screen" section on page
•
Network Statistics—Displays the Network Statistics screen, which shows
Ethernet traffic statistics. For more information, see the
Screen" section on page
Firmware Versions—Displays the Firmware Versions screen, which shows
•
information about the firmware running on the phone. For more information,
see the
"Firmware Versions Screen" section on page
Expansion Modules—Displays the Expansion Module(s) screen, which
•
shows information about the Cisco IP Phone 7914 Expansion Module(s), if
connected to the phone. For more information, see the
Status Screen" section on page
To display the Status menu, press the Settings button and then select Status.
To exit the Status menu, press the Exit softkey.
The Status Messages screen displays up to the 10 most recent status messages that
the phone has generated. You can access this screen at any time, even if the phone
has not finished starting up.
appear. This table also includes actions you can take to address errors that are
indicated.
To display the Status Messages screen, press the Settings button, and then choose
Status > Status Messages.
To remove current status messages, press the Clear softkey.
To exit the Status Messages screen, press the Exit softkey.
7-6.
7-13.
7-15.
Table 7-1
describes the status messages that might
"Status
"Network Statistics
7-15.
"Expansion Module
OL-6966-01