Cisco 7941G Administration Manual page 217

Remote Monitoring
Item
Unified CM 1–5
Information URL
Directories URL
Messages URL
Services URL
DHCP Enabled
DHCP Address Released
Alternate TFTP
Idle URL
Idle URL Time
Description
Host names or IP addresses, in prioritized order, of the
Cisco Unified Communications Manager servers with which the phone
can register. An item can also show the IP address of an SRST router that
is capable of providing limited Cisco Unified Communications Manager
functionality, if such a router is available.
For an available server, an item will show the
Cisco Unified Communications Manager server IP address and one of
the following states:
An item may also include the Survivable Remote Site Telephony (SRST)
designation, which identifies an SRST router capable of providing
Cisco Unified Communications Manager functionality with a limited
feature set. This router assumes control of call processing if all other
Cisco Unified Communications Manager servers become unreachable.
The SRST Cisco Unified Communications Manager always appears last
in the list of servers, even if it is active. You configure the SRST router
address in the Device Pool section in Cisco Unified Communications
Manager Configuration window.
URL of the help text that appears on the phone.
URL of the server from which the phone obtains directory information.
URL of the server from which the phone obtains message services.
URL of the server from which the phone obtains Cisco Unified IP Phone
services.
Indicates that DHCP is being used by the phone.
Indicates the setting of the DHCP Address Released option on the phone's
Network Configuration menu.
Indicates that the phone is using an alternative TFTP server.
URL that the phone displays when the phone has not been used for the
time specified by Idle URL Time, and no menu is open.
Number of seconds that the phone has not been used and no menu is open
before the XML service specified by Idle URL is activated.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
• Active: Cisco Unified Communications Manager server from which
the phone is currently receiving call-processing services.
• Standby: Cisco Unified Communications Manager server to which
the phone switches if the current server becomes unavailable.
• Blank: No current connection to this Cisco Unified Communications
Manager server.
Communications Manager 9.0 (SCCP and SIP)
Network Configuration Area
197