Audio Quality; Headset Connection; Disable Headset; Wireless Headset - Cisco 7941G Administration Manual

For cisco unified communications manager 9.0 (sccp and sip)
Hide thumbs Also See for 7941G:
Table of Contents

Advertisement

Cisco Unified IP Phones Installation
The Cisco Unified IP Phones support wideband headsets.
Note

Audio Quality

Beyond the physical, mechanical and technical performance, the audio portion of a headset must sound good
to the user and to the party on the far end. Sound quality is subjective and Cisco cannot guarantee the
performance of any headsets. However, a variety of headsets from leading headset manufacturers have been
reported to perform well with Cisco Unified IP Phones.
For additional information, see the
Cisco.com.

Headset Connection

To connect a wired headset to the Cisco Unified IP Phone, plug it into the Headset port on the back of the
phone. Press the Headset button on the phone to place and answer calls using the headset.
You can use the wired headset with all of the features on the Cisco Unified IP Phone, including the Volume
and Mute buttons. Use these buttons to adjust the ear piece volume and to mute the speech path from the
headset microphone.
See the wireless headset documentation for information about connecting the headset and using the features.

Disable Headset

You can disable the headset by using Cisco Unified Communications Manager Administration.
To disable the headset, perform the following steps:
Procedure
Step 1
Choose Device > Phone and locate the phone you want to modify.
Step 2
In the Phone Configuration window, check the Disable Speakerphone and Headset check box.
Step 3
Click Apply.

Wireless Headset

By default, the Wireless Headset Hookswitch Control option is disabled. You can enable the option in the
Cisco Unified Communications Manager Administration application.
See the wireless headset documentation for information about connecting the headset and using the features.
Headsets for Cisco Unified IP Phones and Desktop Clients
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
Headset
page on
47

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7941g-ge7961g7961g-ge7962g7942g

Table of Contents