Media Configuration Menu - Cisco 7941G Administration Manual

Media Configuration Menu

Option
Wideband Handset UI
Control
Personalization
Single Button Barge
Enbloc Dialing (SCCP
only)
Media Configuration Menu
The Media Configuration menu displays whether the headset, wireless headset, speakerphone, and video
capability are enabled on the phone. This menu also displays options for recording tones that the phone may
play to indicate that a call may be recorded. The following table describes the options on this menu.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
94
Description
Indicates whether the user can configure
the Wideband Handset option in the phone
user interface.
Values:
• Enabled: The user can configure the
Wideband Handset option in the
Audio Preferences menu on the phone
(choose > User Preferences >
Audio Preferences > Wideband
Handset).
• Disabled: The value of the Wideband
Handset option in Cisco Unified
Communications Manager
Administration gets used (see
Configuration Menu, on page
Default: Enabled
Indicates whether the user can configure
custom ring tones and wallpaper images.
Indicates whether the Single Button Barge
feature is enabled for the phone.
Default: Disabled.
Indicates whether the phone will use Enbloc
dialing. If Enabled, the phone will use
Enbloc dialing when possible. If Disabled,
the phone will not use Enbloc dialing. You
should disable Enbloc dialing if either
Forced Authorization Codes (FAC) or
Client Matter Codes (CMC) dialing is being
used.
Default: Enabled
Cisco Unified IP Phone Settings
To Change
Use Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration.
Media
94).
From Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration.
From Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration.
From Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration.