Cisco 7941G Administration Manual page 113

Cisco Unified IP Phone Settings
Option
Reverting Focus Priority
Auto Call Select
"more" Softkey Timer
Description
Indicates whether the phone shifts the call
focus on the phone screen to an incoming
call or a reverting hold call. Settings
include:
Lower—Focus priority given to incoming
calls.
Higher—Focus priority given to reverting
calls.
Even—Focus priority given to the first call.
Indicates whether the phone automatically
shifts the call focus to an incoming call on
the same line when the user is already on a
call.
When this option is enabled, the phone
shifts the call focus to the most recent
incoming call.
When this option is disabled, all automatic
focus changes, including Auto Line Select,
are disabled regardless of the setting.
Default: Enabled
Indicates the number of seconds that
additional softkeys are displayed after the
user presses more. If this timer expires
before the user presses another softkey, the
display reverts to the initial softkeys.
Range: 5 to 30; 0 represents an infinite
timer.
Default: 5
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
UI Configuration Menu
To Change
From Cisco Unified
Communications Manager
Administration, choose System >
Device Pool.
From Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration.
From Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration.
Communications Manager 9.0 (SCCP and SIP)
93