Network Settings; Cisco Unified Ip Phone Security; Install Locally Significant Certificate - Cisco 7941G Administration Manual

Cisco Unified IP Phones Installation
If the phone successfully passes through these stages, it has started up properly. If the phone does not start
up properly, see

Network Settings

If you are not using DHCP in your network, you must configure these network settings on the
Cisco Unified IP Phone after installing the phone on the network:
• IP address
• IP subnet information (subnet mask for IPv4 and subnet prefix length for IPv6)
• Default gateway IP address
• TFTP server IP address
• You also may configure the domain name and the DNS server settings, if necessary.
Cisco Unified IP Phone Settings, on page

Cisco Unified IP Phone Security

The security features protect against several threats, including threats to the identity of the phone and to data.
These features establish and maintain authenticated communication streams between the phone and the
Cisco Unified Communications Manager server, and digitally sign files before they are delivered.
For more information about the security features, see Cisco Unified Communications Manager Security Guide.
Related Topics
Cisco Unified IP Phone Security Features, on page 13

Install Locally Significant Certificate

You can initiate the installation of a Locally Significant Certificate (LSC) from the Security Configuration
menu on the phone. This menu also lets you update or remove an LSC.
Before You Begin
Make sure that the appropriate Cisco Unified Communications Manager and the Certificate Authority Proxy
Function (CAPF) security configurations are complete:
• The CTL file or ITL file should have a CAPF certificate.
• On Cisco Unified Communications Operating System Administration, verify that the CAPF certificate
• The CAPF is running and configured.
• Additional directory numbers and speed dial numbers, if configured
• Softkeys
Startup Problems, on page
has been installed.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
209.
59.
Communications Manager 9.0 (SCCP and SIP)
Network Settings
57