Features, Templates, Services, And Users; Features, Templates, Services, And Users Overview - Cisco 7941G Administration Manual

Features, Templates, Services, and Users

•
•
•
•
•
•
•
•
•
•
•
•

Features, Templates, Services, and Users Overview

After you install Cisco Unified IP Phones in your network, configure their network settings, and add them to
Cisco Unified Communications Manager, you must use Cisco Unified Communications Manager Administration
to configure telephony features, optionally modify phone templates, set up services, and assign users.
This chapter provides an overview of these configuration and setup procedures. Cisco Unified Communications
Manager documentation provides detailed instructions for these procedures.
For suggestions about how to provide users with information about features, and what information to provide,
see Internal Support Web Site, on page
For information about setting up phones in non-English environments, see
page
Features, Templates, Services, and Users Overview, page 119
Telephony Features Available for Cisco Unified IP Phone, page 120
Product-Specific Parameters, page 144
Corporate and Personal Directories, page 145
Phone Button Templates, page 146
Softkey Templates, page 148
Enable Device Invoked Recording, page 149
Services Setup, page 149
Cisco Unified Communications Manager User Addition, page 150
User Options Web Page Management, page 151
EnergyWise Setup on Cisco Unified IP Phone, page 153
UCR 2008 Setup, page 156
249.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
C H A P T E R
235.
Communications Manager 9.0 (SCCP and SIP)
5
International User Support, on
119