Network Statistics Area - Cisco 7941G Administration Manual

Network Statistics Area

Item
LLDP Power Priority
CDP: PC Port
CDP: SW Port
SSH Access Enabled
Network Statistics Area
The following network statistics hyperlinks on a phone's web page provide information about network traffic
on the phone. To display a network statistics area, access the web page for the phone as described in the
following sections.
• Ethernet Information: Displays information about Ethernet traffic.
• Access: Displays information about network traffic to and from the PC port on the phone.
• Network: Displays information about network traffic to and from the network (SW) port on the phone.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
200
Description
Advertises the phone's power priority to the switch, enabling the switch
to appropriately provide power to the phones. Settings include:
• Unknown: default
• Low
• High
• Critical
Indicates if CDP is supported on the PC port (default is enabled).
Enable CDP on the PC port when Cisco VT Advantage/Unified Video
Advantage (CVTA) is connected to the PC port. CVTA does not work
without CDP interaction with the phone.
When CDP is disabled in Cisco Unified Communications
Note
Manager, a warning is displayed, indicating that disabling CDP
on the PC port prevents CVTA from working.
The current PC and switch port CDP values display on the
Note
Settings menu.
Indicates if CDP is supported on the switch port (default is enabled).
• Enable CDP on the switch port for VLAN assignment for the phone,
power negotiation, QoS management, and 802.1x security.
• Enable CDP on the switch port when the phone is connected to a
Cisco switch.
When CDP is disabled in Cisco Unified Communications
Note
Manager, a warning is presented, indicating that CDP should be
disabled on the switch port only if the phone is connected to a
non-Cisco switch.
Note The current PC and switch port CDP values display on the
Settings menu.
Indicates if the phone accepts or blocks the SSH connections.
Remote Monitoring