Ethernet Configuration Menu - Cisco 7941G Administration Manual

Ethernet Configuration Menu

Option
Wideband Headset
Enterprise Advertise
G.722 Codec
Device Advertise
G.722 Codec
Ethernet Configuration Menu
The Ethernet Configuration menu includes the options that are described in the following table.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
98
Description
Indicates whether wideband is enabled
or disabled for the headset.
Default: Disabled
Enables/disables Cisco Unified IP
Phones to advertise the G.722 codec to
Cisco Unified Communications
Manager.
For more information, see the Cisco
Unified Communications Manager
System Guide, "Cisco Unified IP
Phones" chapter.
When a phone is registered
Note
with a Cisco Unified
Communications Manager that
does not support this setting,
the default is Disabled.
Allows you to override the Enterprise
Advertise G.722 Codec on a per-phone
basis.
Default: Use System Default, which
means the value configured for the
Enterprise Advertise G.722 Codec
parameter gets used.
Cisco Unified IP Phone Settings
To Change
• If Wideband Headset UI Control is
enabled, you or the user can use the
phone and choose
Preferences > Audio Preferences >
Wideband Headset.
• If Wideband Headset UI Control is
disabled, use Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration to
set this value.
Note If you allow this option to be user
controllable in the Wideband
Headset UI Control option, the
user-configured value takes
precedence.
From Cisco Unified Communications
Manager Administration, choose System
> Enterprise Parameters.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone.
> User