Streaming Statistics - Cisco 7941G Administration Manual

Streaming Statistics

• Core Dumps: Includes hyperlinks to individual dump files. The core dump files include data from a
• Status Messages: Displays up to the 10 most recent status messages that the phone has generated since
• Debug Display: Displays debug messages that might be useful to Cisco TAC if you require assistance
Streaming Statistics
A Cisco Unified IP Phone can stream information to and from up to three devices simultaneously. A phone
streams information when it is on a call or running a service that sends or receives audio or data.
The streaming statistics areas on a phone's web page provide information about the streams. Most calls use
only one stream (Stream 1), but some calls use two or three streams. For example, a barged call uses Stream
1 and Stream 2.
To display a Streaming Statistics area, access the web page for the phone as described in the
Page for Phone, on page
Stream 5 hyperlink.
The following table describes the items in the Streaming Statistics areas.
Table 48: Streaming Statistics Area Items
Item
Remote Address
Local Address
Start Time
Stream Status
Host Name
Sender Packets
Sender Octets
Sender Codec
Sender Reports Sent
(see note)
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
204
phone crash.
it was last powered up. You can also see this information from the Status Messages screen on the phone.
Status Messages, on page 172
with troubleshooting.
192, and then click the Stream 1, the Stream 2, the Stream 3, the Stream 4, or the
Description
IP address and UDP port of the destination of the stream.
IP address and UPD port of the phone.
Internal time stamp indicating when Cisco Unified Communications Manager
requested that the phone start transmitting packets.
Indication of if streaming is active or not.
Unique, fixed name that is automatically assigned to the phone based on its
MAC address.
Total number of RTP data packets transmitted by the phone since starting
this connection. The value is 0 if the connection is set to receive only mode.
Total number of payload octets transmitted in RTP data packets by the phone
since starting this connection. The value is 0 if the connection is set to receive
only mode.
Type of audio encoding used for the transmitted stream.
Number of times the RTCP Sender Report have been sent.
describes the status messages that can appear.
Remote Monitoring
Access Web