International Call Logging Support - Cisco 7941G Administration Manual

International User Support

International Call Logging Support

To access the Locale Installer required for a release, access http://software.cisco.com/download/
navigator.html?mdfid=286037605&flowid=46245, navigate to your phone model, and select the Unified
Communications Manager Endpoints Locale Installer link.
For more information, see the "Locale Installer" section in the Cisco Unified Communications Operating
System Administration Guide.
The latest Locale Installer may not be immediately available; continue to check the website for updates.
Note
International Call Logging Support
If your phone system is configured for international call logging (calling party normalization), the call logs,
redial, or call directory entries may display a plus (+) symbol to represent the international escape code for
your location. Depending on the configuration for your phone system, the + may be replaced with the correct
international dialing code, or you may need to edit the number before dialing to manually replace the + with
the international escape code for your location. In addition, while the call log or directory entry may display
the full international number for the received call, the phone display may show the shortened local version of
the number, without international or country codes.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
250